The type implementing this traversable
The type implementing this traversable
A class supporting filtered operations.
A class supporting filtered operations. Instances of this class are
returned by method withFilter
.
Test two objects for inequality.
Test two objects for inequality.
true
if !(this == that), false otherwise.
Equivalent to x.hashCode
except for boxed numeric types and null
.
Equivalent to x.hashCode
except for boxed numeric types and null
.
For numerics, it returns a hash value which is consistent
with value equality: if two value type instances compare
as true, then ## will produce the same hash value for each
of them.
For null
returns a hashcode where null.hashCode
throws a
NullPointerException
.
a hash value consistent with ==
[use case] Returns a new synchronized queue containing the elements from the left hand operand followed by the elements from the right hand operand.
Returns a new synchronized queue containing the elements from the left hand operand followed by the elements from the right hand operand. The element type of the synchronized queue is the most specific superclass encompassing the element types of the two operands.
Example:
scala> val a = List(1) a: List[Int] = List(1) scala> val b = List(2) b: List[Int] = List(2) scala> val c = a ++ b c: List[Int] = List(1, 2) scala> val d = List('a') d: List[Char] = List(a) scala> val e = c ++ d e: List[AnyVal] = List(1, 2, a)
the element type of the returned collection.
the traversable to append.
a new synchronized queue which contains all elements of this synchronized queue
followed by all elements of that
.
As with ++
, returns a new collection containing the elements from the
left operand followed by the elements from the right operand.
As with ++
, returns a new collection containing the elements from the
left operand followed by the elements from the right operand.
It differs from ++
in that the right operand determines the type of
the resulting collection rather than the left one.
Mnemonic: the COLon is on the side of the new COLlection type.
Example:
scala> val x = List(1) x: List[Int] = List(1) scala> val y = LinkedList(2) y: scala.collection.mutable.LinkedList[Int] = LinkedList(2) scala> val z = x ++: y z: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2)
This overload exists because: for the implementation of ++:
we should
reuse that of ++
because many collections override it with more
efficient versions.
Since TraversableOnce
has no ++
method, we have to implement that
directly, but Traversable
and down can use the overload.
the element type of the returned collection.
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type B
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the traversable to append.
an implicit value of class CanBuildFrom
which determines
the result class That
from the current representation type Repr
and
and the new element type B
.
a new collection of type That
which contains all elements
of this traversable collection followed by all elements of that
.
[use case] As with ++
, returns a new collection containing the elements from the left operand followed by the
elements from the right operand.
As with ++
, returns a new collection containing the elements from the left operand followed by the
elements from the right operand.
It differs from ++
in that the right operand determines the type of
the resulting collection rather than the left one.
Mnemonic: the COLon is on the side of the new COLlection type.
Example:
scala> val x = List(1) x: List[Int] = List(1) scala> val y = LinkedList(2) y: scala.collection.mutable.LinkedList[Int] = LinkedList(2) scala> val z = x ++: y z: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2)
the element type of the returned collection.
the traversable to append.
a new synchronized queue which contains all elements of this synchronized queue
followed by all elements of that
.
Adds all elements provided by a TraversableOnce
object
at the end of the queue.
Adds all elements provided by a TraversableOnce
object
at the end of the queue. The elements are prepended in the order they
are given out by the iterator.
a traversable object
the synchronized queue itself.
[use case] A copy of the synchronized queue with an element prepended.
A copy of the synchronized queue with an element prepended.
Note that :-ending operators are right associative (see example).
A mnemonic for +:
vs. :+
is: the COLon goes on the COLlection side.
Also, the original synchronized queue is not modified, so you will want to capture the result.
Example:
scala> val x = List(1) x: List[Int] = List(1) scala> val y = 2 +: x y: List[Int] = List(2, 1) scala> println(x) List(1)
the prepended element
a new synchronized queue consisting of elem
followed
by all elements of this synchronized queue.
Inserts a single element at the end of the queue.
Inserts a single element at the end of the queue.
the element to insert
the builder itself.
adds two or more elements to this growable collection.
adds two or more elements to this growable collection.
the first element to add.
the second element to add.
the remaining elements to add.
the growable collection itself
Prepends a single element to this list.
Prepends a single element to this list. This operation takes constant time.
the element to prepend.
this mutable list.
Applies a binary operator to a start value and all elements of this traversable or iterator, going left to right.
Applies a binary operator to a start value and all elements of this traversable or iterator, going left to right.
Note: /:
is alternate syntax for foldLeft
; z /: xs
is the same as
xs foldLeft z
.
Examples:
Note that the folding function used to compute b is equivalent to that used to compute c.
scala> val a = List(1,2,3,4) a: List[Int] = List(1, 2, 3, 4) scala> val b = (5 /: a)(_+_) b: Int = 15 scala> val c = (5 /: a)((x,y) => x + y) c: Int = 15
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op
between consecutive elements of this traversable or iterator,
going left to right with the start value z
on the left:
op(...op(op(z, x_1), x_2), ..., x_n)
where x_{1}, ..., x_{n}
are the elements of this traversable or iterator.
[use case] A copy of this synchronized queue with an element appended.
A copy of this synchronized queue with an element appended.
A mnemonic for +:
vs. :+
is: the COLon goes on the COLlection side.
Example:
scala> val a = List(1) a: List[Int] = List(1) scala> val b = a :+ 2 b: List[Int] = List(1, 2) scala> println(a) List(1)
the appended element
a new synchronized queue consisting of
all elements of this synchronized queue followed by elem
.
Applies a binary operator to all elements of this traversable or iterator and a start value, going right to left.
Applies a binary operator to all elements of this traversable or iterator and a start value, going right to left.
Note: :\
is alternate syntax for foldRight
; xs :\ z
is the same as
xs foldRight z
.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.
Examples:
Note that the folding function used to compute b is equivalent to that used to compute c.
scala> val a = List(1,2,3,4) a: List[Int] = List(1, 2, 3, 4) scala> val b = (a :\ 5)(_+_) b: Int = 15 scala> val c = (a :\ 5)((x,y) => x + y) c: Int = 15
the result type of the binary operator.
the start value
the binary operator
the result of inserting op
between consecutive elements of this traversable or iterator,
going right to left with the start value z
on the right:
op(x_1, op(x_2, ... op(x_n, z)...))
where x_{1}, ..., x_{n}
are the elements of this traversable or iterator.
The expression x == that
is equivalent to if (x eq null) that eq null else x.equals(that)
.
The expression x == that
is equivalent to if (x eq null) that eq null else x.equals(that)
.
true
if the receiver object is equivalent to the argument; false
otherwise.
Appends all elements of this traversable or iterator to a string builder.
Appends all elements of this traversable or iterator to a string builder.
The written text consists of the string representations (w.r.t. the method
toString
) of all elements of this traversable or iterator without any separator string.
Example:
scala> val a = List(1,2,3,4) a: List[Int] = List(1, 2, 3, 4) scala> val b = new StringBuilder() b: StringBuilder = scala> val h = a.addString(b) h: StringBuilder = 1234
the string builder to which elements are appended.
the string builder b
to which elements were appended.
Appends all elements of this traversable or iterator to a string builder using a separator string.
Appends all elements of this traversable or iterator to a string builder using a separator string.
The written text consists of the string representations (w.r.t. the method toString
)
of all elements of this traversable or iterator, separated by the string sep
.
Example:
scala> val a = List(1,2,3,4) a: List[Int] = List(1, 2, 3, 4) scala> val b = new StringBuilder() b: StringBuilder = scala> a.addString(b, ", ") res0: StringBuilder = 1, 2, 3, 4
the string builder to which elements are appended.
the separator string.
the string builder b
to which elements were appended.
Appends all elements of this traversable or iterator to a string builder using start, end, and separator strings.
Appends all elements of this traversable or iterator to a string builder using start, end, and separator strings.
The written text begins with the string start
and ends with the string end
.
Inside, the string representations (w.r.t. the method toString
)
of all elements of this traversable or iterator are separated by the string sep
.
Example:
scala> val a = List(1,2,3,4) a: List[Int] = List(1, 2, 3, 4) scala> val b = new StringBuilder() b: StringBuilder = scala> a.addString(b , "List(" , ", " , ")") res5: StringBuilder = List(1, 2, 3, 4)
the string builder to which elements are appended.
the starting string.
the separator string.
the ending string.
the string builder b
to which elements were appended.
Aggregates the results of applying an operator to subsequent elements.
Aggregates the results of applying an operator to subsequent elements.
This is a more general form of fold
and reduce
. It is similar to
foldLeft
in that it doesn't require the result to be a supertype of the
element type. In addition, it allows parallel collections to be processed
in chunks, and then combines the intermediate results.
aggregate
splits the traversable or iterator into partitions and processes each
partition by sequentially applying seqop
, starting with z
(like
foldLeft
). Those intermediate results are then combined by using
combop
(like fold
). The implementation of this operation may operate
on an arbitrary number of collection partitions (even 1), so combop
may
be invoked an arbitrary number of times (even 0).
As an example, consider summing up the integer values of a list of chars.
The initial value for the sum is 0. First, seqop
transforms each input
character to an Int and adds it to the sum (of the partition). Then,
combop
just needs to sum up the intermediate results of the partitions:
List('a', 'b', 'c').aggregate(0)({ (sum, ch) => sum + ch.toInt }, { (p1, p2) => p1 + p2 })
the type of accumulated results
the initial value for the accumulated result of the partition - this
will typically be the neutral element for the seqop
operator (e.g.
Nil
for list concatenation or 0
for summation) and may be evaluated
more than once
an operator used to accumulate results within a partition
an associative operator used to combine results from different partitions
Composes this partial function with a transformation function that gets applied to results of this partial function.
Composes this partial function with a transformation function that gets applied to results of this partial function.
the result type of the transformation function.
the transformation function
a partial function with the same domain as this partial function, which maps
arguments x
to k(this(x))
.
Returns the n
-th element of this list.
Returns the n
-th element of this list.
the element of this mutable list at index idx
, where 0
indicates the first element.
IndexOutOfBoundsException
if index does not exist.
Applies this partial function to the given argument when it is contained in the function domain.
Applies this partial function to the given argument when it is contained in the function domain. Applies fallback function where this partial function is not defined.
Note that expression pf.applyOrElse(x, default)
is equivalent to
if(pf isDefinedAt x) pf(x) else default(x)
except that applyOrElse
method can be implemented more efficiently.
For all partial function literals the compiler generates an applyOrElse
implementation which
avoids double evaluation of pattern matchers and guards.
This makes applyOrElse
the basis for the efficient implementation for many operations and scenarios, such as:
orElse
/andThen
chains does not lead to
excessive apply
/isDefinedAt
evaluationlift
and unlift
do not evaluate source functions twice on each invocationrunWith
allows efficient imperative-style combining of partial functions
with conditionally applied actions For non-literal partial function classes with nontrivial isDefinedAt
method
it is recommended to override applyOrElse
with custom implementation that avoids
double isDefinedAt
evaluation. This may result in better performance
and more predictable behavior w.r.t. side effects.
the function argument
the fallback function
the result of this function or fallback function application.
2.10
Cast the receiver object to be of type T0
.
Cast the receiver object to be of type T0
.
Note that the success of a cast at runtime is modulo Scala's erasure semantics.
Therefore the expression 1.asInstanceOf[String]
will throw a ClassCastException
at
runtime, while the expression List(1).asInstanceOf[List[String]]
will not.
In the latter example, because the type argument is erased as part of compilation it is
not possible to check whether the contents of the list are of the requested type.
the receiver object.
ClassCastException
if the receiver object is not an instance of the erasure of type T0
.
Method called from equality methods, so that user-defined subclasses can refuse to be equal to other collections of the same kind.
Method called from equality methods, so that user-defined subclasses can refuse to be equal to other collections of the same kind.
The object with which this iterable collection should be compared
true
, if this iterable collection can possibly equal that
, false
otherwise. The test
takes into consideration only the run-time types of objects but ignores their elements.
Removes all elements from the queue.
Removes all elements from the queue. After this operation is completed, the queue will be empty.
Create a copy of the receiver object.
Create a copy of the receiver object.
The default implementation of the clone
method is platform dependent.
a copy of the receiver object.
not specified by SLS as a member of AnyRef
[use case] Builds a new collection by applying a partial function to all elements of this synchronized queue on which the function is defined.
Builds a new collection by applying a partial function to all elements of this synchronized queue on which the function is defined.
the element type of the returned collection.
the partial function which filters and maps the synchronized queue.
a new synchronized queue resulting from applying the given partial function
pf
to each element on which it is defined and collecting the results.
The order of the elements is preserved.
Finds the first element of the traversable or iterator for which the given partial function is defined, and applies the partial function to it.
Finds the first element of the traversable or iterator for which the given partial function is defined, and applies the partial function to it.
Note: may not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the partial function
an option value containing pf applied to the first
value for which it is defined, or None
if none exists.
Seq("a", 1, 5L).collectFirst({ case x: Int => x*10 }) = Some(10)
Iterates over combinations.
Iterates over combinations. A _combination_ of length n
is a subsequence of
the original sequence, with the elements taken in order. Thus, "xy"
and "yy"
are both length-2 combinations of "xyy"
, but "yx"
is not. If there is
more than one way to generate the same subsequence, only one will be returned.
For example, "xyyy"
has three different ways to generate "xy"
depending on
whether the first, second, or third "y"
is selected. However, since all are
identical, only one will be chosen. Which of the three will be taken is an
implementation detail that is not defined.
An Iterator which traverses the possible n-element combinations of this sequence.
"abbbc".combinations(2) = Iterator(ab, ac, bb, bc)
The factory companion object that builds instances of class mutable.Queue
.
The factory companion object that builds instances of class mutable.Queue
.
(or its Iterable
superclass where class mutable.Queue
is not a Seq
.)
Composes two instances of Function1 in a new Function1, with this function applied last.
Composes two instances of Function1 in a new Function1, with this function applied last.
the type to which function g
can be applied
a function A => T1
a new function f
such that f(x) == apply(g(x))
Tests whether this sequence contains a given value as an element.
Tests whether this sequence contains a given value as an element.
Note: may not terminate for infinite-sized collections.
the element to test.
true
if this sequence has an element that is equal (as
determined by ==
) to elem
, false
otherwise.
Tests whether this sequence contains a given sequence as a slice.
Tests whether this sequence contains a given sequence as a slice.
Note: may not terminate for infinite-sized collections.
the sequence to test
true
if this sequence contains a slice with the same elements
as that
, otherwise false
.
[use case] Copies the elements of this synchronized queue to an array.
Copies the elements of this synchronized queue to an array.
Fills the given array xs
with at most len
elements of
this synchronized queue, starting at position start
.
Copying will stop once either the end of the current synchronized queue is reached,
or the end of the target array is reached, or len
elements have been copied.
the array to fill.
the starting index.
the maximal number of elements to copy.
[use case] Copies the elements of this synchronized queue to an array.
Copies the elements of this synchronized queue to an array.
Fills the given array xs
with values of this synchronized queue.
Copying will stop once either the end of the current synchronized queue is reached,
or the end of the target array is reached.
the array to fill.
[use case] Copies the elements of this synchronized queue to an array.
Copies the elements of this synchronized queue to an array.
Fills the given array xs
with values of this synchronized queue, beginning at index start
.
Copying will stop once either the end of the current synchronized queue is reached,
or the end of the target array is reached.
the array to fill.
the starting index.
Copies all elements of this traversable or iterator to a buffer.
Copies all elements of this traversable or iterator to a buffer.
Note: will not terminate for infinite-sized collections.
The buffer to which elements are copied.
Tests whether every element of this sequence relates to the corresponding element of another sequence by satisfying a test predicate.
Tests whether every element of this sequence relates to the corresponding element of another sequence by satisfying a test predicate.
the type of the elements of that
the other sequence
the test predicate, which relates elements from both sequences
true
if both sequences have the same length and
p(x, y)
is true
for all corresponding elements x
of this sequence
and y
of that
, otherwise false
.
Counts the number of elements in the traversable or iterator which satisfy a predicate.
Counts the number of elements in the traversable or iterator which satisfy a predicate.
the predicate used to test elements.
the number of elements satisfying the predicate p
.
Returns the first element in the queue, and removes this element from the queue.
Returns the first element in the queue, and removes this element from the queue.
the first element of the queue.
Returns all elements in the queue which satisfy the given predicate, and removes those elements from the queue.
Returns all elements in the queue which satisfy the given predicate, and removes those elements from the queue.
the predicate used for choosing elements
a sequence of all elements in the queue for which p yields true.
Returns the first element in the queue which satisfies the given predicate, and removes this element from the queue.
Returns the first element in the queue which satisfies the given predicate, and removes this element from the queue.
the predicate used for choosing the first element
the first element of the queue for which p yields true
[use case] Computes the multiset difference between this synchronized queue and another sequence.
Computes the multiset difference between this synchronized queue and another sequence.
the sequence of elements to remove
a new synchronized queue which contains all elements of this synchronized queue
except some of occurrences of elements that also appear in that
.
If an element value x
appears
n times in that
, then the first n occurrences of x
will not form
part of the result, but any following occurrences will.
Builds a new sequence from this sequence without any duplicate elements.
Builds a new sequence from this sequence without any duplicate elements.
Note: will not terminate for infinite-sized collections.
A new sequence which contains the first occurrence of every element of this sequence.
Selects all elements except first n ones.
Selects all elements except first n ones.
the number of elements to drop from this sequence.
a sequence consisting of all elements of this sequence except the first n
ones, or else the
empty sequence, if this sequence has less than n
elements.
Selects all elements except last n ones.
Selects all elements except last n ones.
The number of elements to take
a sequence consisting of all elements of this sequence except the last n
ones, or else the
empty sequence, if this sequence has less than n
elements.
Drops longest prefix of elements that satisfy a predicate.
Drops longest prefix of elements that satisfy a predicate.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the longest suffix of this traversable collection whose first element
does not satisfy the predicate p
.
Tests whether this sequence ends with the given sequence.
Tests whether this sequence ends with the given sequence.
Note: will not terminate for infinite-sized collections.
the sequence to test
true
if this sequence has that
as a suffix, false
otherwise.
Adds all elements to the queue.
Adds all elements to the queue.
the elements to add.
Tests whether the argument (that
) is a reference to the receiver object (this
).
Tests whether the argument (that
) is a reference to the receiver object (this
).
The eq
method implements an equivalence relation on
non-null instances of AnyRef
, and has three additional properties:
x
and y
of type AnyRef
, multiple invocations of
x.eq(y)
consistently returns true
or consistently returns false
.x
of type AnyRef
, x.eq(null)
and null.eq(x)
returns false
.null.eq(null)
returns true
. When overriding the equals
or hashCode
methods, it is important to ensure that their behavior is
consistent with reference equality. Therefore, if two objects are references to each other (o1 eq o2
), they
should be equal to each other (o1 == o2
) and they should hash to the same value (o1.hashCode == o2.hashCode
).
true
if the argument is a reference to the receiver object; false
otherwise.
Checks if two queues are structurally identical.
Checks if two queues are structurally identical.
The object to compare the sequence to
true, iff both queues contain the same sequence of elements.
Tests whether a predicate holds for at least one element of this sequence.
Tests whether a predicate holds for at least one element of this sequence.
Note: may not terminate for infinite-sized collections.
the predicate used to test elements.
false
if this sequence is empty, otherwise true
if the given predicate p
holds for some of the elements of this sequence, otherwise false
Selects all elements of this traversable collection which satisfy a predicate.
Selects all elements of this traversable collection which satisfy a predicate.
the predicate used to test elements.
a new traversable collection consisting of all elements of this traversable collection that satisfy the given
predicate p
. The order of the elements is preserved.
Selects all elements of this traversable collection which do not satisfy a predicate.
Selects all elements of this traversable collection which do not satisfy a predicate.
the predicate used to test elements.
a new traversable collection consisting of all elements of this traversable collection that do not satisfy the given
predicate p
. The order of the elements is preserved.
Called by the garbage collector on the receiver object when there are no more references to the object.
Called by the garbage collector on the receiver object when there are no more references to the object.
The details of when and if the finalize
method is invoked, as
well as the interaction between finalize
and non-local returns
and exceptions, are all platform dependent.
Finds the first element of the sequence satisfying a predicate, if any.
Finds the first element of the sequence satisfying a predicate, if any.
Note: may not terminate for infinite-sized collections.
the predicate used to test elements.
an option value containing the first element in the sequence
that satisfies p
, or None
if none exists.
[use case] Builds a new collection by applying a function to all elements of this synchronized queue and using the elements of the resulting collections.
Builds a new collection by applying a function to all elements of this synchronized queue and using the elements of the resulting collections.
For example:
def getWords(lines: Seq[String]): Seq[String] = lines flatMap (line => line split "\\W+")
The type of the resulting collection is guided by the static type of synchronized queue. This might cause unexpected results sometimes. For example:
// lettersOf will return a Seq[Char] of likely repeated letters, instead of a Set def lettersOf(words: Seq[String]) = words flatMap (word => word.toSet) // lettersOf will return a Set[Char], not a Seq def lettersOf(words: Seq[String]) = words.toSet flatMap (word => word.toSeq) // xs will be an Iterable[Int] val xs = Map("a" -> List(11,111), "b" -> List(22,222)).flatMap(_._2) // ys will be a Map[Int, Int] val ys = Map("a" -> List(1 -> 11,1 -> 111), "b" -> List(2 -> 22,2 -> 222)).flatMap(_._2)
the element type of the returned collection.
the function to apply to each element.
a new synchronized queue resulting from applying the given collection-valued function
f
to each element of this synchronized queue and concatenating the results.
[use case] Converts this synchronized queue of traversable collections into a synchronized queue formed by the elements of these traversable collections.
Converts this synchronized queue of traversable collections into a synchronized queue formed by the elements of these traversable collections.
The resulting collection's type will be guided by the static type of synchronized queue. For example:
val xs = List( Set(1, 2, 3), Set(1, 2, 3) ).flatten // xs == List(1, 2, 3, 1, 2, 3) val ys = Set( List(1, 2, 3), List(3, 2, 1) ).flatten // ys == Set(1, 2, 3)
the type of the elements of each traversable collection.
a new synchronized queue resulting from concatenating all element synchronized queues.
Folds the elements of this traversable or iterator using the specified associative binary operator.
Folds the elements of this traversable or iterator using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
Note: will not terminate for infinite-sized collections.
a type parameter for the binary operator, a supertype of A
.
a neutral element for the fold operation; may be added to the result
an arbitrary number of times, and must not change the result (e.g., Nil
for list concatenation,
0 for addition, or 1 for multiplication).
a binary operator that must be associative.
the result of applying the fold operator op
between all the elements and z
, or z
if this traversable or iterator is empty.
Applies a binary operator to a start value and all elements of this sequence, going left to right.
Applies a binary operator to a start value and all elements of this sequence, going left to right.
Note: will not terminate for infinite-sized collections.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op
between consecutive elements of this sequence,
going left to right with the start value z
on the left:
op(...op(z, x_1), x_2, ..., x_n)
where x_{1}, ..., x_{n}
are the elements of this sequence.
Returns z
if this sequence is empty.
Applies a binary operator to all elements of this sequence and a start value, going right to left.
Applies a binary operator to all elements of this sequence and a start value, going right to left.
Note: will not terminate for infinite-sized collections.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op
between consecutive elements of this sequence,
going right to left with the start value z
on the right:
op(x_1, op(x_2, ... op(x_n, z)...))
where x_{1}, ..., x_{n}
are the elements of this sequence.
Returns z
if this sequence is empty.
Tests whether a predicate holds for all elements of this sequence.
Tests whether a predicate holds for all elements of this sequence.
Note: may not terminate for infinite-sized collections.
the predicate used to test elements.
true
if this sequence is empty or the given predicate p
holds for all elements of this sequence, otherwise false
.
[use case] Applies a function f
to all elements of this synchronized queue.
Applies a function f
to all elements of this synchronized queue.
Note: this method underlies the implementation of most other bulk operations. Subclasses should re-implement this method if a more efficient implementation exists.
the function that is applied for its side-effect to every element.
The result of function f
is discarded.
Returns string formatted according to given format
string.
Returns string formatted according to given format
string.
Format strings are as for String.format
(@see java.lang.String.format).
Returns the first element in the queue, or throws an error if there is no element contained in the queue.
Returns the first element in the queue, or throws an error if there is no element contained in the queue.
the first element.
The generic builder that builds instances of Traversable at arbitrary element types.
The generic builder that builds instances of Traversable at arbitrary element types.
Returns the n
-th element of this list or None
if index does not exist.
Returns the n
-th element of this list or None
if index does not exist.
A representation that corresponds to the dynamic class of the receiver object.
A representation that corresponds to the dynamic class of the receiver object.
The nature of the representation is platform dependent.
a representation that corresponds to the dynamic class of the receiver object.
not specified by SLS as a member of AnyRef
Partitions this traversable collection into a map of traversable collections according to some discriminator function.
Partitions this traversable collection into a map of traversable collections according to some discriminator function.
Note: this method is not re-implemented by views. This means when applied to a view it will always force the view and return a new traversable collection.
the type of keys returned by the discriminator function.
the discriminator function.
A map from keys to traversable collections such that the following invariant holds:
(xs groupBy f)(k) = xs filter (x => f(x) == k)
That is, every key k
is bound to a traversable collection of those elements x
for which f(x)
equals k
.
Partitions elements in fixed size iterable collections.
Partitions elements in fixed size iterable collections.
the number of elements per group
An iterator producing iterable collections of size size
, except the
last will be less than size size
if the elements don't divide evenly.
scala.collection.Iterator, method grouped
Tests whether this traversable collection is known to have a finite size.
Tests whether this traversable collection is known to have a finite size.
All strict collections are known to have finite size. For a non-strict
collection such as Stream
, the predicate returns true
if all
elements have been computed. It returns false
if the stream is
not yet evaluated to the end. Non-empty Iterators usually return
false
even if they were created from a collection with a known
finite size.
Note: many collection methods will not work on collections of infinite sizes.
The typical failure mode is an infinite loop. These methods always attempt a
traversal without checking first that hasDefiniteSize
returns true
.
However, checking hasDefiniteSize
can provide an assurance that size is
well-defined and non-termination is not a concern.
true
if this collection is known to have finite size,
false
otherwise.
Hashcodes for Seq
produce a value from the hashcodes of all the
elements of the sequence.
Hashcodes for Seq
produce a value from the hashcodes of all the
elements of the sequence.
the hash code value for this object.
Returns the first element in this list
Returns the first element in this list
the first element of this mutable list.
Optionally selects the first element.
Optionally selects the first element.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the first element of this traversable collection if it is nonempty,
None
if it is empty.
[use case] Finds index of first occurrence of some value in this synchronized queue after or at some start index.
Finds index of first occurrence of some value in this synchronized queue after or at some start index.
the element value to search for.
the start index
the index >= from
of the first element of this synchronized queue that is equal (as determined by ==
)
to elem
, or -1
, if none exists.
[use case] Finds index of first occurrence of some value in this synchronized queue.
Finds index of first occurrence of some value in this synchronized queue.
the element value to search for.
the index of the first element of this synchronized queue that is equal (as determined by ==
)
to elem
, or -1
, if none exists.
Finds first index after or at a start index where this sequence contains a given sequence as a slice.
Finds first index after or at a start index where this sequence contains a given sequence as a slice.
Note: may not terminate for infinite-sized collections.
the sequence to test
the start index
the first index >= from
such that the elements of this sequence starting at this index
match the elements of sequence that
, or -1
of no such subsequence exists.
Finds first index where this sequence contains a given sequence as a slice.
Finds first index where this sequence contains a given sequence as a slice.
Note: may not terminate for infinite-sized collections.
the sequence to test
the first index such that the elements of this sequence starting at this index
match the elements of sequence that
, or -1
of no such subsequence exists.
Finds index of the first element satisfying some predicate after or at some start index.
Finds index of the first element satisfying some predicate after or at some start index.
Note: may not terminate for infinite-sized collections.
the predicate used to test elements.
the start index
the index >= from
of the first element of this sequence that satisfies the predicate p
,
or -1
, if none exists.
Finds index of first element satisfying some predicate.
Finds index of first element satisfying some predicate.
Note: may not terminate for infinite-sized collections.
the predicate used to test elements.
the index of the first element of this general sequence that satisfies the predicate p
,
or -1
, if none exists.
Produces the range of all indices of this sequence.
Produces the range of all indices of this sequence.
a Range
value from 0
to one less than the length of this sequence.
Selects all elements except the last.
Selects all elements except the last.
Note: might return different results for different runs, unless the underlying collection type is ordered.
a traversable collection consisting of all elements of this traversable collection except the last one.
UnsupportedOperationException
if the traversable collection is empty.
Iterates over the inits of this traversable collection.
Iterates over the inits of this traversable collection. The first value will be this
traversable collection and the final one will be an empty traversable collection, with the intervening
values the results of successive applications of init
.
an iterator over all the inits of this traversable collection
List(1,2,3).inits = Iterator(List(1,2,3), List(1,2), List(1), Nil)
[use case] Computes the multiset intersection between this synchronized queue and another sequence.
Computes the multiset intersection between this synchronized queue and another sequence.
the sequence of elements to intersect with.
a new synchronized queue which contains all elements of this synchronized queue
which also appear in that
.
If an element value x
appears
n times in that
, then the first n occurrences of x
will be retained
in the result, but any following occurrences will be omitted.
Tests whether this sequence contains given index.
Tests whether this sequence contains given index.
The implementations of methods apply
and isDefinedAt
turn a Seq[A]
into
a PartialFunction[Int, A]
.
true
if this sequence contains an element at position idx
, false
otherwise.
Checks if the queue is empty.
Checks if the queue is empty.
true, iff there is no element in the queue.
Test whether the dynamic type of the receiver object is T0
.
Test whether the dynamic type of the receiver object is T0
.
Note that the result of the test is modulo Scala's erasure semantics.
Therefore the expression 1.isInstanceOf[String]
will return false
, while the
expression List(1).isInstanceOf[List[String]]
will return true
.
In the latter example, because the type argument is erased as part of compilation it is
not possible to check whether the contents of the list are of the specified type.
true
if the receiver object is an instance of erasure of type T0
; false
otherwise.
Tests whether this traversable collection can be repeatedly traversed.
Tests whether this traversable collection can be repeatedly traversed.
true
Returns an iterator over up to length
elements of this list.
Returns an iterator over up to length
elements of this list.
the new iterator
Selects the last element.
Selects the last element.
The last element of this mutable list.
NoSuchElementException
If the mutable list is empty.
[use case] Finds index of last occurrence of some value in this synchronized queue before or at a given end index.
Finds index of last occurrence of some value in this synchronized queue before or at a given end index.
the element value to search for.
the end index.
the index <= end
of the last element of this synchronized queue that is equal (as determined by ==
)
to elem
, or -1
, if none exists.
[use case] Finds index of last occurrence of some value in this synchronized queue.
Finds index of last occurrence of some value in this synchronized queue.
the element value to search for.
the index of the last element of this synchronized queue that is equal (as determined by ==
)
to elem
, or -1
, if none exists.
Finds last index before or at a given end index where this sequence contains a given sequence as a slice.
Finds last index before or at a given end index where this sequence contains a given sequence as a slice.
the sequence to test
the end index
the last index <= end
such that the elements of this sequence starting at this index
match the elements of sequence that
, or -1
of no such subsequence exists.
Finds last index where this sequence contains a given sequence as a slice.
Finds last index where this sequence contains a given sequence as a slice.
Note: will not terminate for infinite-sized collections.
the sequence to test
the last index such that the elements of this sequence starting a this index
match the elements of sequence that
, or -1
of no such subsequence exists.
Finds index of last element satisfying some predicate before or at given end index.
Finds index of last element satisfying some predicate before or at given end index.
the predicate used to test elements.
the index <= end
of the last element of this sequence that satisfies the predicate p
,
or -1
, if none exists.
Finds index of last element satisfying some predicate.
Finds index of last element satisfying some predicate.
Note: will not terminate for infinite-sized collections.
the predicate used to test elements.
the index of the last element of this general sequence that satisfies the predicate p
,
or -1
, if none exists.
Optionally selects the last element.
Optionally selects the last element.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the last element of this traversable collection$ if it is nonempty,
None
if it is empty.
Returns the length of this list.
Returns the length of this list.
the number of elements in this mutable list.
Compares the length of this sequence to a test value.
Compares the length of this sequence to a test value.
the test value that gets compared with the length.
A value x
where
x < 0 if this.length < len x == 0 if this.length == len x > 0 if this.length > len
The method as implemented here does not call length
directly; its running time
is O(length min len)
instead of O(length)
. The method should be overwritten
if computing length
is cheap.
Turns this partial function into a plain function returning an Option
result.
Turns this partial function into a plain function returning an Option
result.
a function that takes an argument x
to Some(this(x))
if this
is defined for x
, and to None
otherwise.
Function.unlift
[use case] Builds a new collection by applying a function to all elements of this synchronized queue.
Builds a new collection by applying a function to all elements of this synchronized queue.
the element type of the returned collection.
the function to apply to each element.
a new synchronized queue resulting from applying the given function
f
to each element of this synchronized queue and collecting the results.
Creates a new builder by applying a transformation function to the results of this builder.
Creates a new builder by applying a transformation function to the results of this builder.
the type of collection returned by f
.
the transformation function.
a new builder which is the same as the current builder except that a transformation function is applied to this builder's result.
[use case] Finds the largest element.
Finds the largest element.
the largest element of this synchronized queue.
[use case] Finds the first element which yields the largest value measured by function f.
Finds the first element which yields the largest value measured by function f.
The result type of the function f.
The measuring function.
the first element of this synchronized queue with the largest value measured by function f.
[use case] Finds the smallest element.
Finds the smallest element.
the smallest element of this synchronized queue
[use case] Finds the first element which yields the smallest value measured by function f.
Finds the first element which yields the smallest value measured by function f.
The result type of the function f.
The measuring function.
the first element of this synchronized queue with the smallest value measured by function f.
Displays all elements of this traversable or iterator in a string.
Displays all elements of this traversable or iterator in a string.
a string representation of this traversable or iterator. In the resulting string
the string representations (w.r.t. the method toString
)
of all elements of this traversable or iterator follow each other without any
separator string.
Displays all elements of this traversable or iterator in a string using a separator string.
Displays all elements of this traversable or iterator in a string using a separator string.
the separator string.
a string representation of this traversable or iterator. In the resulting string
the string representations (w.r.t. the method toString
)
of all elements of this traversable or iterator are separated by the string sep
.
List(1, 2, 3).mkString("|") = "1|2|3"
Displays all elements of this traversable or iterator in a string using start, end, and separator strings.
Displays all elements of this traversable or iterator in a string using start, end, and separator strings.
the starting string.
the separator string.
the ending string.
a string representation of this traversable or iterator. The resulting string
begins with the string start
and ends with the string
end
. Inside, the string representations (w.r.t. the method
toString
) of all elements of this traversable or iterator are separated by
the string sep
.
List(1, 2, 3).mkString("(", "; ", ")") = "(1; 2; 3)"
Equivalent to !(this eq that)
.
Equivalent to !(this eq that)
.
true
if the argument is not a reference to the receiver object; false
otherwise.
The builder that builds instances of type mutable.Queue
[A]
The builder that builds instances of type mutable.Queue
[A]
Tests whether the traversable or iterator is not empty.
Tests whether the traversable or iterator is not empty.
true
if the traversable or iterator contains at least one element, false
otherwise.
Wakes up a single thread that is waiting on the receiver object's monitor.
Wakes up a single thread that is waiting on the receiver object's monitor.
not specified by SLS as a member of AnyRef
Wakes up all threads that are waiting on the receiver object's monitor.
Wakes up all threads that are waiting on the receiver object's monitor.
not specified by SLS as a member of AnyRef
Composes this partial function with a fallback partial function which gets applied where this partial function is not defined.
Composes this partial function with a fallback partial function which gets applied where this partial function is not defined.
the argument type of the fallback function
the result type of the fallback function
the fallback function
a partial function which has as domain the union of the domains
of this partial function and that
. The resulting partial function
takes x
to this(x)
where this
is defined, and to that(x)
where it is not.
[use case] A copy of this synchronized queue with an element value appended until a given target length is reached.
A copy of this synchronized queue with an element value appended until a given target length is reached.
the target length
the padding value
a new synchronized queue consisting of
all elements of this synchronized queue followed by the minimal number of occurrences of elem
so
that the resulting synchronized queue has a length of at least len
.
Returns a parallel implementation of this collection.
Returns a parallel implementation of this collection.
For most collection types, this method creates a new parallel collection by copying
all the elements. For these collection, par
takes linear time. Mutable collections
in this category do not produce a mutable parallel collection that has the same
underlying dataset, so changes in one collection will not be reflected in the other one.
Specific collections (e.g. ParArray
or mutable.ParHashMap
) override this default
behaviour by creating a parallel collection which shares the same underlying dataset.
For these collections, par
takes constant or sublinear time.
All parallel collections return a reference to themselves.
a parallel implementation of this collection
The default par
implementation uses the combiner provided by this method
to create a new parallel collection.
The default par
implementation uses the combiner provided by this method
to create a new parallel collection.
a combiner for the parallel collection of type ParRepr
Partitions this traversable collection in two traversable collections according to a predicate.
Partitions this traversable collection in two traversable collections according to a predicate.
the predicate on which to partition.
a pair of traversable collections: the first traversable collection consists of all elements that
satisfy the predicate p
and the second traversable collection consists of all elements
that don't. The relative order of the elements in the resulting traversable collections
is the same as in the original traversable collection.
[use case] Produces a new synchronized queue where a slice of elements in this synchronized queue is replaced by another sequence.
Produces a new synchronized queue where a slice of elements in this synchronized queue is replaced by another sequence.
the index of the first replaced element
the number of elements to drop in the original synchronized queue
a new synchronized queue consisting of all elements of this synchronized queue
except that replaced
elements starting from from
are replaced
by patch
.
Iterates over distinct permutations.
Iterates over distinct permutations.
An Iterator which traverses the distinct permutations of this sequence.
"abb".permutations = Iterator(abb, bab, bba)
Returns the length of the longest prefix whose elements all satisfy some predicate.
Returns the length of the longest prefix whose elements all satisfy some predicate.
Note: may not terminate for infinite-sized collections.
the predicate used to test elements.
the length of the longest prefix of this general sequence
such that every element of the segment satisfies the predicate p
.
[use case] Multiplies up the elements of this collection.
Multiplies up the elements of this collection.
the product of all elements in this synchronized queue of numbers of type Int
.
Instead of Int
, any other type T
with an implicit Numeric[T]
implementation
can be used as element type of the synchronized queue and as result type of product
.
Examples of such types are: Long
, Float
, Double
, BigInt
.
Reduces the elements of this traversable or iterator using the specified associative binary operator.
Reduces the elements of this traversable or iterator using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
A type parameter for the binary operator, a supertype of A
.
A binary operator that must be associative.
The result of applying reduce operator op
between all the elements if the traversable or iterator is nonempty.
UnsupportedOperationException
if this traversable or iterator is empty.
Applies a binary operator to all elements of this sequence, going left to right.
Applies a binary operator to all elements of this sequence, going left to right.
Note: will not terminate for infinite-sized collections.
the result type of the binary operator.
the result of inserting op
between consecutive elements of this sequence,
going left to right:
op( op( ... op(x_1, x_2) ..., x_{n-1}), x_n)
where x_{1}, ..., x_{n}
are the elements of this sequence.
UnsupportedOperationException
if this sequence is empty.
Optionally applies a binary operator to all elements of this traversable or iterator, going left to right.
Optionally applies a binary operator to all elements of this traversable or iterator, going left to right.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.
the result type of the binary operator.
the binary operator.
an option value containing the result of reduceLeft(op)
if this traversable or iterator is nonempty,
None
otherwise.
Reduces the elements of this traversable or iterator, if any, using the specified associative binary operator.
Reduces the elements of this traversable or iterator, if any, using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
A type parameter for the binary operator, a supertype of A
.
A binary operator that must be associative.
An option value containing result of applying reduce operator op
between all
the elements if the collection is nonempty, and None
otherwise.
Applies a binary operator to all elements of this sequence, going right to left.
Applies a binary operator to all elements of this sequence, going right to left.
Note: will not terminate for infinite-sized collections.
the result type of the binary operator.
the binary operator.
the result of inserting op
between consecutive elements of this sequence,
going right to left:
op(x_1, op(x_2, ..., op(x_{n-1}, x_n)...))
where x_{1}, ..., x_{n}
are the elements of this sequence.
UnsupportedOperationException
if this sequence is empty.
Optionally applies a binary operator to all elements of this traversable or iterator, going right to left.
Optionally applies a binary operator to all elements of this traversable or iterator, going right to left.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.
the result type of the binary operator.
the binary operator.
an option value containing the result of reduceRight(op)
if this traversable or iterator is nonempty,
None
otherwise.
The collection of type traversable collection underlying this TraversableLike
object.
The collection of type traversable collection underlying this TraversableLike
object.
By default this is implemented as the TraversableLike
object itself,
but this can be overridden.
Produces a collection from the added elements.
Produces a collection from the added elements. The builder's contents are undefined after this operation.
a collection containing the elements added to this builder.
Returns new sequence with elements in reversed order.
Returns new sequence with elements in reversed order.
Note: will not terminate for infinite-sized collections.
A new sequence with all elements of this sequence in reversed order.
An iterator yielding elements in reversed order.
An iterator yielding elements in reversed order.
Note: will not terminate for infinite-sized collections.
Note: xs.reverseIterator
is the same as xs.reverse.iterator
but might be more efficient.
an iterator yielding the elements of this sequence in reversed order
[use case] Builds a new collection by applying a function to all elements of this synchronized queue and collecting the results in reversed order.
Builds a new collection by applying a function to all elements of this synchronized queue and collecting the results in reversed order.
Note: xs.reverseMap(f)
is the same as xs.reverse.map(f)
but might be more efficient.
the element type of the returned collection.
the function to apply to each element.
a new synchronized queue resulting from applying the given function
f
to each element of this synchronized queue and collecting the results in reversed order.
Composes this partial function with an action function which gets applied to results of this partial function.
Composes this partial function with an action function which gets applied to results of this partial function. The action function is invoked only for its side effects; its result is ignored.
Note that expression pf.runWith(action)(x)
is equivalent to
if(pf isDefinedAt x) { action(pf(x)); true } else false
except that runWith
is implemented via applyOrElse
and thus potentially more efficient.
Using runWith
avoids double evaluation of pattern matchers and guards for partial function literals.
the action function
a function which maps arguments x
to isDefinedAt(x)
. The resulting function
runs action(this(x))
where this
is defined.
2.10
applyOrElse
.
[use case] Checks if the other iterable collection contains the same elements in the same order as this synchronized queue.
Checks if the other iterable collection contains the same elements in the same order as this synchronized queue.
the collection to compare with.
true
, if both collections contain the same elements in the same order, false
otherwise.
Computes a prefix scan of the elements of the collection.
Computes a prefix scan of the elements of the collection.
Note: The neutral element z
may be applied more than once.
element type of the resulting collection
type of the resulting collection
neutral element for the operator op
the associative operator for the scan
combiner factory which provides a combiner
a new traversable collection containing the prefix scan of the elements in this traversable collection
Produces a collection containing cumulative results of applying the operator going left to right.
Produces a collection containing cumulative results of applying the operator going left to right.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the type of the elements in the resulting collection
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom
which determines
the result class That
from the current representation type Repr
and
and the new element type B
.
collection with intermediate results
Produces a collection containing cumulative results of applying the operator going right to left.
Produces a collection containing cumulative results of applying the operator going right to left. The head of the collection is the last cumulative result.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered.
Example:
List(1, 2, 3, 4).scanRight(0)(_ + _) == List(10, 9, 7, 4, 0)
the type of the elements in the resulting collection
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom
which determines
the result class That
from the current representation type Repr
and
and the new element type B
.
collection with intermediate results
(Changed in version 2.9.0) The behavior of scanRight
has changed. The previous behavior can be reproduced with scanRight.reverse.
Computes length of longest segment whose elements all satisfy some predicate.
Computes length of longest segment whose elements all satisfy some predicate.
Note: may not terminate for infinite-sized collections.
the predicate used to test elements.
the index where the search starts.
the length of the longest segment of this sequence starting from index from
such that every element of the segment satisfies the predicate p
.
A version of this collection with all of the operations implemented sequentially (i.e., in a single-threaded manner).
A version of this collection with all of the operations implemented sequentially (i.e., in a single-threaded manner).
This method returns a reference to this collection. In parallel collections, it is redefined to return a sequential implementation of this collection. In both cases, it has O(1) complexity.
a sequential view of the collection.
The size of this sequence, equivalent to length
.
The size of this sequence, equivalent to length
.
Note: will not terminate for infinite-sized collections.
the number of elements in this sequence.
Gives a hint that one expects the result
of this builder
to have the same size as the given collection, plus some delta.
Gives a hint that one expects the result
of this builder
to have the same size as the given collection, plus some delta. This will
provide a hint only if the collection is known to have a cheap
size
method. Currently this is assumed to be the case if and only if
the collection is of type IndexedSeqLike
.
Some builder classes
will optimize their representation based on the hint. However,
builder implementations are still required to work correctly even if the hint is
wrong, i.e. a different number of elements is added.
the collection which serves as a hint for the result's size.
a correction to add to the coll.size
to produce the size hint.
Gives a hint that one expects the result
of this builder
to have the same size as the given collection, plus some delta.
Gives a hint that one expects the result
of this builder
to have the same size as the given collection, plus some delta. This will
provide a hint only if the collection is known to have a cheap
size
method. Currently this is assumed to be the case if and only if
the collection is of type IndexedSeqLike
.
Some builder classes
will optimize their representation based on the hint. However,
builder implementations are still required to work correctly even if the hint is
wrong, i.e. a different number of elements is added.
the collection which serves as a hint for the result's size.
Gives a hint how many elements are expected to be added
when the next result
is called.
Gives a hint how many elements are expected to be added
when the next result
is called. Some builder classes
will optimize their representation based on the hint. However,
builder implementations are still required to work correctly even if the hint is
wrong, i.e. a different number of elements is added.
the hint how many elements will be added.
Gives a hint how many elements are expected to be added
when the next result
is called, together with an upper bound
given by the size of some other collection.
Gives a hint how many elements are expected to be added
when the next result
is called, together with an upper bound
given by the size of some other collection. Some builder classes
will optimize their representation based on the hint. However,
builder implementations are still required to work correctly even if the hint is
wrong, i.e. a different number of elements is added.
the hint how many elements will be added.
the bounding collection. If it is an IndexedSeqLike, then sizes larger than collection's size are reduced.
Selects an interval of elements.
Selects an interval of elements. The returned collection is made up
of all elements x
which satisfy the invariant:
from <= indexOf(x) < until
a sequence containing the elements greater than or equal to
index from
extending up to (but not including) index until
of this sequence.
Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped.)
Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped.)
the number of elements per group
the distance between the first elements of successive groups
An iterator producing iterable collections of size size
, except the
last and the only element will be truncated if there are
fewer elements than size.
scala.collection.Iterator, method sliding
Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped.) "Sliding window" step is 1 by default.
Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped.) "Sliding window" step is 1 by default.
the number of elements per group
An iterator producing iterable collections of size size
, except the
last and the only element will be truncated if there are
fewer elements than size.
scala.collection.Iterator, method sliding
Sorts this Seq
according to the Ordering which results from transforming
an implicitly given Ordering with a transformation function.
Sorts this Seq
according to the Ordering which results from transforming
an implicitly given Ordering with a transformation function.
the target type of the transformation f
, and the type where
the ordering ord
is defined.
the transformation function mapping elements
to some other domain B
.
the ordering assumed on domain B
.
a sequence consisting of the elements of this sequence
sorted according to the ordering where x < y
if
ord.lt(f(x), f(y))
.
val words = "The quick brown fox jumped over the lazy dog".split(' ') // this works because scala.Ordering will implicitly provide an Ordering[Tuple2[Int, Char]] words.sortBy(x => (x.length, x.head)) res0: Array[String] = Array(The, dog, fox, the, lazy, over, brown, quick, jumped)
scala.math.Ordering Note: will not terminate for infinite-sized collections.
Sorts this sequence according to a comparison function.
Sorts this sequence according to a comparison function.
Note: will not terminate for infinite-sized collections.
The sort is stable. That is, elements that are equal (as determined by
lt
) appear in the same order in the sorted sequence as in the original.
the comparison function which tests whether its first argument precedes its second argument in the desired ordering.
a sequence consisting of the elements of this sequence
sorted according to the comparison function lt
.
List("Steve", "Tom", "John", "Bob").sortWith(_.compareTo(_) < 0) = List("Bob", "John", "Steve", "Tom")
Sorts this sequence according to an Ordering.
Sorts this sequence according to an Ordering.
The sort is stable. That is, elements that are equal (as determined by
lt
) appear in the same order in the sorted sequence as in the original.
the ordering to be used to compare elements.
a sequence consisting of the elements of this sequence
sorted according to the ordering ord
.
Splits this sequence into a prefix/suffix pair according to a predicate.
Splits this sequence into a prefix/suffix pair according to a predicate.
Note: c span p
is equivalent to (but possibly more efficient than)
(c takeWhile p, c dropWhile p)
, provided the evaluation of the
predicate p
does not cause any side-effects.
a pair consisting of the longest prefix of this sequence whose
elements all satisfy p
, and the rest of this sequence.
Splits this traversable collection into two at a given position.
Splits this traversable collection into two at a given position.
Note: c splitAt n
is equivalent to (but possibly more efficient than)
(c take n, c drop n)
.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the position at which to split.
a pair of traversable collections consisting of the first n
elements of this traversable collection, and the other elements.
Tests whether this sequence contains the given sequence at a given index.
Tests whether this sequence contains the given sequence at a given index.
Note: If the both the receiver object this
and the argument
that
are infinite sequences this method may not terminate.
the sequence to test
the index where the sequence is searched.
true
if the sequence that
is contained in this sequence at
index offset
, otherwise false
.
Tests whether this general sequence starts with the given sequence.
Tests whether this general sequence starts with the given sequence.
the sequence to test
true
if this collection has that
as a prefix, false
otherwise.
Defines the prefix of this object's toString
representation.
Defines the prefix of this object's toString
representation.
a string representation which starts the result of toString
applied to this traversable collection. By default the string prefix is the
simple name of the collection class traversable collection.
[use case] Sums up the elements of this collection.
Sums up the elements of this collection.
the sum of all elements in this synchronized queue of numbers of type Int
.
Instead of Int
, any other type T
with an implicit Numeric[T]
implementation
can be used as element type of the synchronized queue and as result type of sum
.
Examples of such types are: Long
, Float
, Double
, BigInt
.
Returns the rest of this list
Returns the rest of this list
a mutable queue consisting of all elements of this mutable queue except the first one.
Iterates over the tails of this traversable collection.
Iterates over the tails of this traversable collection. The first value will be this
traversable collection and the final one will be an empty traversable collection, with the intervening
values the results of successive applications of tail
.
an iterator over all the tails of this traversable collection
List(1,2,3).tails = Iterator(List(1,2,3), List(2,3), List(3), Nil)
Selects first n elements.
Selects first n elements.
the number of elements to take from this sequence.
a sequence consisting only of the first n
elements of this sequence,
or else the whole sequence, if it has less than n
elements.
Selects last n elements.
Selects last n elements.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the number of elements to take
a iterable collection consisting only of the last n
elements of this iterable collection, or else the
whole iterable collection, if it has less than n
elements.
Takes longest prefix of elements that satisfy a predicate.
Takes longest prefix of elements that satisfy a predicate.
the longest prefix of this sequence whose elements all satisfy
the predicate p
.
The underlying collection seen as an instance of
.Seq
The underlying collection seen as an instance of
.
By default this is implemented as the current collection object itself,
but this can be overridden.
Seq
[use case] Converts this synchronized queue into another by copying all elements.
Converts this synchronized queue into another by copying all elements.
The collection type to build.
a new collection containing all elements of this synchronized queue.
[use case] Converts this synchronized queue to an array.
Converts this synchronized queue to an array.
an array containing all elements of this synchronized queue.
An ClassTag
must be available for the element type of this synchronized queue.
Uses the contents of this traversable or iterator to create a new mutable buffer.
Uses the contents of this traversable or iterator to create a new mutable buffer.
Note: will not terminate for infinite-sized collections.
a buffer containing all elements of this traversable or iterator.
A conversion from collections of type Repr
to
objects.Seq
A conversion from collections of type Repr
to
objects.
By default this is implemented as just a cast, but this can be overridden.
Seq
Converts this traversable or iterator to an indexed sequence.
Converts this traversable or iterator to an indexed sequence.
Note: will not terminate for infinite-sized collections.
an indexed sequence containing all elements of this traversable or iterator.
Returns this iterable collection as an iterable collection.
Returns this iterable collection as an iterable collection.
A new collection will not be built; lazy collections will stay lazy.
Note: will not terminate for infinite-sized collections.
an Iterable
containing all elements of this iterable collection.
Returns an Iterator over the elements in this iterable collection.
Returns an Iterator over the elements in this iterable collection. Produces the same
result as iterator
.
Note: will not terminate for infinite-sized collections.
an Iterator containing all elements of this iterable collection.
Returns an instance of scala.List containing the same sequence of elements.
Returns an instance of scala.List containing the same sequence of elements.
a list containing all elements of this mutable list.
[use case] Converts this synchronized queue to a map.
Converts this synchronized queue to a map. This method is unavailable unless the elements are members of Tuple2, each ((T, U)) becoming a key-value pair in the map. Duplicate keys will be overwritten by later keys: if this is an unordered collection, which key is in the resulting map is undefined.
a map of type immutable.Map[T, U]
containing all key/value pairs of type (T, U)
of this synchronized queue.
Converts this sequence to a sequence.
Converts this sequence to a sequence.
Note: will not terminate for infinite-sized collections.
A new collection will not be built; in particular, lazy sequences will stay lazy.
a sequence containing all elements of this sequence.
Converts this traversable or iterator to a set.
Converts this traversable or iterator to a set.
Note: will not terminate for infinite-sized collections.
a set containing all elements of this traversable or iterator.
Converts this iterable collection to a stream.
Converts this iterable collection to a stream.
a stream containing all elements of this iterable collection.
Returns a textual representation of a queue as a string.
Returns a textual representation of a queue as a string.
the string representation of this queue.
Converts this traversable collection to an unspecified Traversable.
Converts this traversable collection to an unspecified Traversable. Will return the same collection if this instance is already Traversable.
Note: will not terminate for infinite-sized collections.
a Traversable containing all elements of this traversable collection.
Converts this traversable or iterator to a Vector.
Converts this traversable or iterator to a Vector.
Note: will not terminate for infinite-sized collections.
a vector containing all elements of this traversable or iterator.
Applies a transformation function to all values contained in this sequence.
Applies a transformation function to all values contained in this sequence. The transformation function produces new values from existing elements.
the transformation to apply
the sequence itself.
Transposes this collection of traversable collections into a collection of collections.
Transposes this collection of traversable collections into a collection of collections.
The resulting collection's type will be guided by the static type of collection. For example:
val xs = List( Set(1, 2, 3), Set(4, 5, 6)).transpose // xs == List( // List(1, 4), // List(2, 5), // List(3, 6)) val ys = Vector( List(1, 2, 3), List(4, 5, 6)).transpose // ys == Vector( // Vector(1, 4), // Vector(2, 5), // Vector(3, 6))
the type of the elements of each traversable collection.
an implicit conversion which asserts that the
element type of this collection is a Traversable
.
a two-dimensional collection of collections which has as nth row the nth column of this collection.
(Changed in version 2.9.0) transpose
throws an IllegalArgumentException
if collections are not uniformly sized.
IllegalArgumentException
if all collections in this collection
are not of the same size.
[use case] Produces a new sequence which contains all elements of this synchronized queue and also all elements of a given sequence.
Produces a new sequence which contains all elements of this synchronized queue and also all elements of
a given sequence. xs union ys
is equivalent to xs ++ ys
.
Another way to express this
is that xs union ys
computes the order-preserving multi-set union of xs
and ys
.
union
is hence a counter-part of diff
and intersect
which also work on multi-sets.
the sequence to add.
a new synchronized queue which contains all elements of this synchronized queue
followed by all elements of that
.
Converts this collection of pairs into two collections of the first and second half of each pair.
Converts this collection of pairs into two collections of the first and second half of each pair.
val xs = Traversable( (1, "one"), (2, "two"), (3, "three")).unzip // xs == (Traversable(1, 2, 3), // Traversable(one, two, three))
the type of the first half of the element pairs
the type of the second half of the element pairs
an implicit conversion which asserts that the element type of this collection is a pair.
a pair of collections, containing the first, respectively second half of each element pair of this collection.
Converts this collection of triples into three collections of the first, second, and third element of each triple.
Converts this collection of triples into three collections of the first, second, and third element of each triple.
val xs = Traversable( (1, "one", '1'), (2, "two", '2'), (3, "three", '3')).unzip3 // xs == (Traversable(1, 2, 3), // Traversable(one, two, three), // Traversable(1, 2, 3))
the type of the first member of the element triples
the type of the second member of the element triples
the type of the third member of the element triples
an implicit conversion which asserts that the element type of this collection is a triple.
a triple of collections, containing the first, second, respectively third member of each element triple of this collection.
Updates the n
-th element of this list to a new value.
Updates the n
-th element of this list to a new value.
IndexOutOfBoundsException
if index does not exist.
[use case] A copy of this synchronized queue with one single replaced element.
A copy of this synchronized queue with one single replaced element.
the position of the replacement
the replacing element
a copy of this synchronized queue with the element at position index
replaced by elem
.
Creates a non-strict view of a slice of this sequence.
Creates a non-strict view of a slice of this sequence.
Note: the difference between view
and slice
is that view
produces
a view of the current sequence, whereas slice
produces a new sequence.
Note: view(from, to)
is equivalent to view.slice(from, to)
the index of the first element of the view
the index of the element following the view
a non-strict view of a slice of this sequence, starting at index from
and extending up to (but not including) index until
.
Creates a non-strict view of this sequence.
Creates a non-strict view of this sequence.
a non-strict view of this sequence.
Creates a non-strict filter of this traversable collection.
Creates a non-strict filter of this traversable collection.
Note: the difference between c filter p
and c withFilter p
is that
the former creates a new collection, whereas the latter only
restricts the domain of subsequent map
, flatMap
, foreach
,
and withFilter
operations.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the predicate used to test elements.
an object of class WithFilter
, which supports
map
, flatMap
, foreach
, and withFilter
operations.
All these operations apply to those elements of this traversable collection
which satisfy the predicate p
.
[use case] Returns a synchronized queue formed from this synchronized queue and another iterable collection by combining corresponding elements in pairs.
Returns a synchronized queue formed from this synchronized queue and another iterable collection by combining corresponding elements in pairs. If one of the two collections is longer than the other, its remaining elements are ignored.
the type of the second half of the returned pairs
The iterable providing the second half of each result pair
a new synchronized queue containing pairs consisting of
corresponding elements of this synchronized queue and that
. The length
of the returned collection is the minimum of the lengths of this synchronized queue and that
.
[use case] Returns a synchronized queue formed from this synchronized queue and another iterable collection by combining corresponding elements in pairs.
Returns a synchronized queue formed from this synchronized queue and another iterable collection by combining corresponding elements in pairs. If one of the two collections is shorter than the other, placeholder elements are used to extend the shorter collection to the length of the longer.
the type of the second half of the returned pairs
The iterable providing the second half of each result pair
the element to be used to fill up the result if this synchronized queue is shorter than that
.
the element to be used to fill up the result if that
is shorter than this synchronized queue.
a new synchronized queue containing pairs consisting of
corresponding elements of this synchronized queue and that
. The length
of the returned collection is the maximum of the lengths of this synchronized queue and that
.
If this synchronized queue is shorter than that
, thisElem
values are used to pad the result.
If that
is shorter than this synchronized queue, thatElem
values are used to pad the result.
[use case] Zips this synchronized queue with its indices.
Zips this synchronized queue with its indices.
A new synchronized queue containing pairs consisting of all elements of this
synchronized queue paired with their index. Indices start at 0
.
List("a", "b", "c").zipWithIndex = List(("a", 0), ("b", 1), ("c", 2))
(synchronizedQueue: MonadOps[A]).filter(p)
(synchronizedQueue: MonadOps[A]).flatMap(f)
(synchronizedQueue: MonadOps[A]).map(f)
(synchronizedQueue: MonadOps[A]).withFilter(p)
Return the proper suffix of this list which starts with the first element that satisfies p
.
Return the proper suffix of this list which starts with the first element that satisfies p
.
That element is unlinked from the list. If no element satisfies p
, return None.
(Since version 2.11.0) extractFirst inappropriately exposes implementation details. Use dequeue or dequeueAll.
This is a synchronized version of the
Queue[T]
class. It implements a data structure that allows one to insert and retrieve elements in a first-in-first-out (FIFO) manner.type of elements contained in this synchronized queue.
(Since version 2.11.0) Synchronization via selective overriding of methods is inherently unreliable. Consider java.util.concurrent.ConcurrentLinkedQueue as an alternative.
1.0, 03/05/2004
1